Air Filter III - experience the change!

We are very happy that our new Air Filter is finally available!

Already knew? Of course, you can also use our popular air filter system for your 3D printer, for soldering or for your other laser cutters! Now use the usual, top suction quality for all your devices!

Thanks to our specially developed external control, you can control the Mr Beam Air Filter System with your third-party devices using the Mr Beam Air Filter Controller (e.g. 3D printers and other laser cutters).

It effectively filters fumes, particles and odours, ensuring safe indoor use.

It's ideal for placing under your desk and comes with a hose and end fitting. Thanks to the wheels, the Air Filter III is always mobile in your office or workshop.

As usual, you can find the pre-filter cartridges and the matching main filter in our Mr Beam Store.

Important info: This external control is not required if the air filter is used with a Mr Beam.

Technical data:

Dimensions Air Filter System (approx.)
Width/Depth/Height: 335 x 525 x 565 mm
Weight: 19kg
Maximum sound level: 56 dB (A)

Air filter controller

Width/Depth/Height (with knob): 77 x 56 x 32 mm
Weight: 59g
Display size: 1.28"

Environmental conditions
Ambient temperature: 5 - 30 °C
Humidity: 10% - 60%

Power supply
Operating voltage: 19V
Power consumption: 90W

Note: We reserve the right to make technical changes

How is the Air Filter III actually constructed?

The air is pumped out using a fan in the bottom of the air filter system from the housing of the Mr Beam via the exhaust hose into the back of the air filter system. There it first passes the vertically oriented one Pre-filter [1] before it goes into the on both sides Main filter [2] is vacuumed in order to have the largest area available. The clean air is then sucked out of the bottom of the main filter.

1.

2.

The pre-filter removes all coarse particles from the exhaust air, while the main filter filters out fine dust and odours using the HEPA and activated carbon filters. Clean air is then blown out again on the underside of the air filter system.

Which air filter system is right for me?

The Air Filter III In contrast to our Air Filter II, it has one significantly more powerful fan, which increases the air flow. So the effort is worth it, mainly when there is a lot of material abrasion. In addition, the ones used are Filter in Air Filter III larger than in Air Filter II. This is how they are Not only more efficient at filtering air, but also last longer. Of course, the filters still need to be changed from time to time. You can find out how this works with both air filter systems in this article.

All in all, it's suitable Air Filter III for all frequent users of the Mr Beam who also work with materials with a lot of abrasion.

Apart from that, the Air Filter III requires more power due to the more powerful fan. Therefore, an extra power supply is required, which is of course included in the scope of delivery.

Please note: The new main filter weighs over 10kg. Therefore, the new Air Filter is not as portable as the Air Filter II. We recommend removing the filter before transport. The new filter is equipped with practical wheels for transport in the office/workshop.

Downloads for your Mr Beam!

Welcome to our download area - Here you will find helpful information, instructions and files about the hardware and software of your Mr Beam. By the way, you can also find some of these directly in the user interface as soon as you have connected to your Mr Beam.

Hardware downloads

Instructions for laser cutter: Download

Laser head cleaning instructions

Quickstart Guide German: Download

Data sheet laser cutter Mr Beam II dreamcut [S]: Download

Data sheet laser cutter Mr Beam II dreamcut [x] : Download

Air filter data sheet: Download

Air Filter System Instructions: Download

Instructions Air Filter III: Download

Instructions Mr Beam Height Extension: Download

Laser safety: Download

Declaration of conformity Mr Beam laser cutter: Download

Declaration of Conformity Mr Beam Air Filter System: Download

Here Click here to download our multilingual instructions

Software downloads:

Latest software update: Download

IP Tool (USB): Download

Network Reset (USB): Download

WIFI configuration (USB): Download

Stick to delete the design files: Download

Design Backup Stick: Download

Can I return ordered products?

Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation

How much are the shipping costs?

Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.

What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?

The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.

You can find more information about repairs on ourrepair service landing pages.

Here you will find the instructions for packing your Mr Beam for return: Packaging instructions