At least since the introduction of our pastel-coloured plywood, we know that you love pastel more than anything! Now there's something brand new in the Mr Beam Shop - namely pastel acrylic sheets. And for all those who can't get enough of acrylic, there is now our practical savings package for all [x] head users!

The Mr Beam Acrylic Bo[x]

Whether loops, lettering, key rings or cute name tags - there are almost no limits to creativity!

Important: If you order this box and have a Mr Beam, then it is imperative that you have an [x] laser head. Only he brings the necessary energy to the material, so that you can also cut the panels without any problems.

The acrylic can of course also be used with other laser cutters. However, we cannot provide any settings for this.

Information about the product:

13 acrylic paints for you to try!

white - black - orange - red - dark red - green - yellow and all our pastel colours together in one set! You save almost 25 euros compared to the individual purchase

Acrylic sheets, A3, 3mm thick in different colours. Info for Mr Beam users: Only suitable for use with a Mr Beam II dreamcut [x] device. We also recommend using our Mr Beam Cutting Sti[x] and, if necessary, the magnet clips when cutting. The heat can warp the acrylic.

By the way: With the pastel colours, one side is matt and the other is shiny!

Tip: In the case of very filigree motifs, it is also worth going one more pass than specified in the standard settings. Better a little faster and more often - this way the acrylic can't "melt together" again so quickly. It is also important that the laser head is very well cleaned, and the filters are not full. The material needs the full laser power to be cut through properly. It is also important that the laser head is properly focused.

Please remove the protective film before use.

Cutting settings for the pastel colours in detail:

Spearmint Green 6x 150
Parma Violet 7x 100
Sour Grape 5x 150
Raspberry Sherbet 2x 150
Orange Fizz 2x 150
Lemon candy 3x 150

You can also find all settings in the Mr Beam software. Please carry out a current software update so that you have all the cutting settings.

Happy lasering!

Downloads for your Mr Beam!

Welcome to our download area - Here you will find helpful information, instructions and files about the hardware and software of your Mr Beam. By the way, you can also find some of these directly in the user interface as soon as you have connected to your Mr Beam.

Hardware downloads

Instructions for laser cutter: Download

Laser head cleaning instructions

Quickstart Guide German: Download

Data sheet laser cutter Mr Beam II dreamcut [S]: Download

Data sheet laser cutter Mr Beam II dreamcut [x] : Download

Air filter data sheet: Download

Air Filter System Instructions: Download

Instructions Air Filter III: Download

Instructions Mr Beam Height Extension: Download

Laser safety: Download

Declaration of conformity Mr Beam laser cutter: Download

Declaration of Conformity Mr Beam Air Filter System: Download

Here Click here to download our multilingual instructions

Software downloads:

Latest software update: Download

IP Tool (USB): Download

Network Reset (USB): Download

WIFI configuration (USB): Download

Stick to delete the design files: Download

Design Backup Stick: Download

Can I return ordered products?

Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation

How much are the shipping costs?

Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.

What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?

The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.

You can find more information about repairs on ourrepair service landing pages.

Here you will find the instructions for packing your Mr Beam for return: Packaging instructions