Mr Beam Laser Acrylic Two Tone Suitable for [x] Various Colours 1.6mm A3

Skip to product information
1 of 5

Your choice:

Regular price € 23,90 EUR
Regular price Sale price € 23,90 EUR
Offer Sold out
Tax included. Shipping calculated at checkout.

Delivery time 1 - 3 days

View full details

A strong community where you can find help and exchange ideas!

From the device to the accessories, the consumables and the inspection, you get everything coordinated with us and from a single source !

Made in Germany : You can always rely on quality and service!

Since the introduction of our pastel-coloured acrylic, we have known that you love acrylic more than anything! Now there's something completely new in the Mr Beam Shop - namely two-colour laser acrylic! The second colour appears with the engraving.

Whether loops, lettering, key rings or even cute name tags - there are almost no limits to creativity!

Important: If you have a Mr Beam, then it is imperative that you have an [x] laser head. Only it brings the necessary energy to the material so that you can cut the panels without any problems.

The acrylic can of course also be used with other laser cutters. However, we cannot provide any settings for this.

Information about the product:

Pastel acrylic sheet, A3, 1.6 mm thick in various colours with a second layer of paint. Info for Mr Beam users: Only suitable or recommended for use with a Mr Beam II dreamcut [x] device.

Tip: For very delicate motifs, it is worth running one pass more than specified in the standard settings. It's better to do it a little faster and more often - so the acrylic can't "melt" together again so quickly. It is also important that the laser head is cleaned very well and the filters are not full. The material needs the full laser power to be cut through well. It is also important that the laser head is focused accordingly.

Please be sure to remove the protective film before use.

Settings in detail for the [x], we recommend 0.1 line spacing:

grey/white: engraving: 40%/2000 - cutting: 5/300
White blue: Engraving: 30%/2000 - Cutting: 3/500
apple green/white: Engraving: 40%/2000 - Cutting: 5/300
white/green: Engraving: 40%/2000 - Cutting: 2/500
yellow black: Engraving: 40%/2000 - Cutting: 2/500
White black: Engraving: 40%/2000 - Cutting: 2/500
Red Black: Engraving: 30%/2000 - Cutting: 2/500
silver black: Engraving: 40%/2000 - Cutting: 2/500

 



After engraving, it is recommended to clean the material, for example with the Ultra Grime cloths.


Laser head compatible
Laser head compatible
Material
acrylic
Dimensions
A3
Note: We reserve the right to make technical changes
Downloads for your Mr Beam!

Welcome to our download area - Here you will find helpful information, instructions and files about the hardware and software of your Mr Beam. By the way, you can also find some of these directly in the user interface as soon as you have connected to your Mr Beam.

Hardware downloads

Instructions for laser cutter: Download

Laser head cleaning instructions

Quickstart Guide German: Download

Data sheet laser cutter Mr Beam II dreamcut [S]: Download

Data sheet laser cutter Mr Beam II dreamcut [x] : Download

Air filter data sheet: Download

Air Filter System Instructions: Download

Instructions Air Filter III: Download

Instructions Mr Beam Height Extension: Download

Laser safety: Download

Declaration of conformity Mr Beam laser cutter: Download

Declaration of Conformity Mr Beam Air Filter System: Download

Here
 Click here to download our multilingual instructions

Software downloads:

Latest software update: Download

IP Tool (USB): Download

Network Reset (USB): Download

WIFI configuration (USB): Download

Stick to delete the design files: Download

Design Backup Stick: Download

Can I return ordered products?

Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation

How much are the shipping costs?

Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.

What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?

The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.

You can find more information about repairs on ourrepair service landing pages.

Here you will find the instructions for packing your Mr Beam for return: Packaging instructions

Item number 910-00198

Since the introduction of our pastel-coloured acrylic, we have known that you love acrylic more than anything! Now there's something completely new in the Mr Beam Shop - namely two-colour laser acrylic! The second colour appears with the engraving.

Whether loops, lettering, key rings or even cute name tags - there are almost no limits to creativity!

Important: If you have a Mr Beam, then it is imperative that you have an [x] laser head. Only it brings the necessary energy to the material so that you can cut the panels without any problems.

The acrylic can of course also be used with other laser cutters. However, we cannot provide any settings for this.

Information about the product:

Pastel acrylic sheet, A3, 1.6 mm thick in various colours with a second layer of paint. Info for Mr Beam users: Only suitable or recommended for use with a Mr Beam II dreamcut [x] device.

Tip: For very delicate motifs, it is worth running one pass more than specified in the standard settings. It's better to do it a little faster and more often - so the acrylic can't "melt" together again so quickly. It is also important that the laser head is cleaned very well and the filters are not full. The material needs the full laser power to be cut through well. It is also important that the laser head is focused accordingly.

Please be sure to remove the protective film before use.

Settings in detail for the [x], we recommend 0.1 line spacing:

grey/white: engraving: 40%/2000 - cutting: 5/300
White blue: Engraving: 30%/2000 - Cutting: 3/500
apple green/white: Engraving: 40%/2000 - Cutting: 5/300
white/green: Engraving: 40%/2000 - Cutting: 2/500
yellow black: Engraving: 40%/2000 - Cutting: 2/500
White black: Engraving: 40%/2000 - Cutting: 2/500
Red Black: Engraving: 30%/2000 - Cutting: 2/500
silver black: Engraving: 40%/2000 - Cutting: 2/500

 



After engraving, it is recommended to clean the material, for example with the Ultra Grime cloths.


Laser head compatible
Laser head compatible
Material
acrylic
Dimensions
A3
Note: We reserve the right to make technical changes
Downloads for your Mr Beam!

Welcome to our download area - Here you will find helpful information, instructions and files about the hardware and software of your Mr Beam. By the way, you can also find some of these directly in the user interface as soon as you have connected to your Mr Beam.

Hardware downloads

Instructions for laser cutter: Download

Laser head cleaning instructions

Quickstart Guide German: Download

Data sheet laser cutter Mr Beam II dreamcut [S]: Download

Data sheet laser cutter Mr Beam II dreamcut [x] : Download

Air filter data sheet: Download

Air Filter System Instructions: Download

Instructions Air Filter III: Download

Instructions Mr Beam Height Extension: Download

Laser safety: Download

Declaration of conformity Mr Beam laser cutter: Download

Declaration of Conformity Mr Beam Air Filter System: Download

Here
 Click here to download our multilingual instructions

Software downloads:

Latest software update: Download

IP Tool (USB): Download

Network Reset (USB): Download

WIFI configuration (USB): Download

Stick to delete the design files: Download

Design Backup Stick: Download

Can I return ordered products?

Consumers have a 14-day right of withdrawal. Please note that, for example, if you purchase a device, this means that it may only be used for testing purposes during the 14-day period. We reserve the right to charge for excessive loss of value. To test the Mr Beam, we recommend renting it in advance. If materials/filters/accessories have been demonstrably damaged during testing and trying out, we reserve the right to demand compensation

How much are the shipping costs?

Free shipping inside of Germany. If you come from another country, shipping will be calculated during checkout.

What is actually covered by the Mr Beam laser cutter's warranty and what is repaired?

The guarantee covers all repairs that arise from possible production or device errors. This applies to the mechanical components as well as all relevant components, safety devices and software. We must invoice for repairs resulting from handling errors or accidental damage by the customer - as this requires us to use additional and unscheduled working time and spare parts. If you have a problem with your Mr Beam, contact us via our ticket system.

You can find more information about repairs on ourrepair service landing pages.

Here you will find the instructions for packing your Mr Beam for return: Packaging instructions

reviews