Balsa wood is easy to engrave and cut because it is a very soft wood.
The Mr Beam II dreamcut [S] can engrave metal using the markSolid laser marking spray. You can read everything in our Knowledge Base.
The Mr Beam is particularly good for cutting and engraving plywood.
Cutting and engraving solid wood as a laser application is particularly popular with our users.
Gray board can be engraved well with the Mr Beam. Depending on the material, grey board can also be cut.
With the Mr Beam you can engrave the back of a mirror for a personal touch.
Depending on the color, acrylic can be engraved and cut (black/orange). Clear/light/blue acrylic cannot be processed.
Due to the open-pored material structure, foam can be easily cut and engraved depending on the colour.
Depending on the material, textiles can be engraved. Otherwise the Mr Beam can cut textiles and fabrics precisely .
Balsa wood is easy to engrave and cut because it is a very soft wood.
The Mr Beam II dreamcut [S] can engrave metal using the markSolid laser marking spray. You can read everything in our Knowledge Base.
The Mr Beam is particularly good for cutting and engraving plywood.
Cutting and engraving solid wood as a laser application is particularly popular with our users.
Gray board can be engraved well with the Mr Beam. Depending on the material, grey board can also be cut.
![Mr Beam dreamcut [x] Lasercutter](http://www.mr-beam.org/cdn/shop/files/mr-beam-dreamcut-x-laser-hero.jpg?v=1704362921&width=2400)
