Mr Beam Air Filter III & Controller
A strong community where you can find help and exchange ideas!
From the device to the accessories, the consumables and the inspection, you get everything coordinated with us and from a single source !
Made in Germany : You can always rely on quality and service!
Air Filter III - experience the change!
We are very happy that our new Air Filter is finally available!
Already knew? Of course, you can also use our popular air filter system for your 3D printer, for soldering or for your other laser cutters! Now use the usual, top suction quality for all your devices!
Thanks to our specially developed external control, you can control the Mr Beam Air Filter System with your third-party devices using the Mr Beam Air Filter Controller (e.g. 3D printers and other laser cutters).
It effectively filters fumes, particles and odours, ensuring safe indoor use.
It's ideal for placing under your desk and comes with a hose and end fitting. Thanks to the wheels, the Air Filter III is always mobile in your office or workshop.
As usual, you can find the pre-filter cartridges and the matching main filter in our Mr Beam Store.
Important info: This external control is not required if the air filter is used with a Mr Beam.
Technical data:
Dimensions Air Filter System (approx.)
Width/Depth/Height: 335 x 525 x 565 mm
Weight: 19kg
Maximum sound level: 56 dB (A)
Air filter controller
Width/Depth/Height (with knob): 77 x 56 x 32 mm
Weight: 59g
Display size: 1.28"
Environmental conditions
Ambient temperature: 5 - 30 °C
Humidity: 10% - 60%
Power supply
Operating voltage: 19V
Power consumption: 90W
Note: We reserve the right to make technical changes
How is the Air Filter III actually constructed?
The air is pumped out using a fan in the bottom of the air filter system from the housing of the Mr Beam via the exhaust hose into the back of the air filter system. There it first passes the vertically oriented one Pre-filter [1] before it goes into the on both sides Main filter [2] is vacuumed in order to have the largest area available. The clean air is then sucked out of the bottom of the main filter.
1. 
2. 
The pre-filter removes all coarse particles from the exhaust air, while the main filter filters out fine dust and odours using the HEPA and activated carbon filters. Clean air is then blown out again on the underside of the air filter system.
Which air filter system is right for me?
The Air Filter III In contrast to our Air Filter II, it has one significantly more powerful fan, which increases the air flow. So the effort is worth it, mainly when there is a lot of material abrasion. In addition, the ones used are Filter in Air Filter III larger than in Air Filter II. This is how they are Not only more efficient at filtering air, but also last longer. Of course, the filters still need to be changed from time to time. You can find out how this works with both air filter systems in this article.
All in all, it's suitable Air Filter III for all frequent users of the Mr Beam who also work with materials with a lot of abrasion.
Apart from that, the Air Filter III requires more power due to the more powerful fan. Therefore, an extra power supply is required, which is of course included in the scope of delivery.
Please note: The new main filter weighs over 10kg. Therefore, the new Air Filter is not as portable as the Air Filter II. We recommend removing the filter before transport. The new filter is equipped with practical wheels for transport in the office/workshop.
Item number 903-00011
Air Filter III - experience the change!
We are very happy that our new Air Filter is finally available!
Already knew? Of course, you can also use our popular air filter system for your 3D printer, for soldering or for your other laser cutters! Now use the usual, top suction quality for all your devices!
Thanks to our specially developed external control, you can control the Mr Beam Air Filter System with your third-party devices using the Mr Beam Air Filter Controller (e.g. 3D printers and other laser cutters).
It effectively filters fumes, particles and odours, ensuring safe indoor use.
It's ideal for placing under your desk and comes with a hose and end fitting. Thanks to the wheels, the Air Filter III is always mobile in your office or workshop.
As usual, you can find the pre-filter cartridges and the matching main filter in our Mr Beam Store.
Important info: This external control is not required if the air filter is used with a Mr Beam.
Technical data:
Dimensions Air Filter System (approx.)
Width/Depth/Height: 335 x 525 x 565 mm
Weight: 19kg
Maximum sound level: 56 dB (A)
Air filter controller
Width/Depth/Height (with knob): 77 x 56 x 32 mm
Weight: 59g
Display size: 1.28"
Environmental conditions
Ambient temperature: 5 - 30 °C
Humidity: 10% - 60%
Power supply
Operating voltage: 19V
Power consumption: 90W
Note: We reserve the right to make technical changes
How is the Air Filter III actually constructed?
The air is pumped out using a fan in the bottom of the air filter system from the housing of the Mr Beam via the exhaust hose into the back of the air filter system. There it first passes the vertically oriented one Pre-filter [1] before it goes into the on both sides Main filter [2] is vacuumed in order to have the largest area available. The clean air is then sucked out of the bottom of the main filter.
1.
2.
The pre-filter removes all coarse particles from the exhaust air, while the main filter filters out fine dust and odours using the HEPA and activated carbon filters. Clean air is then blown out again on the underside of the air filter system.
Which air filter system is right for me?
The Air Filter III In contrast to our Air Filter II, it has one significantly more powerful fan, which increases the air flow. So the effort is worth it, mainly when there is a lot of material abrasion. In addition, the ones used are Filter in Air Filter III larger than in Air Filter II. This is how they are Not only more efficient at filtering air, but also last longer. Of course, the filters still need to be changed from time to time. You can find out how this works with both air filter systems in this article.
All in all, it's suitable Air Filter III for all frequent users of the Mr Beam who also work with materials with a lot of abrasion.
Apart from that, the Air Filter III requires more power due to the more powerful fan. Therefore, an extra power supply is required, which is of course included in the scope of delivery.
Please note: The new main filter weighs over 10kg. Therefore, the new Air Filter is not as portable as the Air Filter II. We recommend removing the filter before transport. The new filter is equipped with practical wheels for transport in the office/workshop.
